Toolbarn’s Tool Spotlight – Paslode 1/2″ Medium Crown Framing Pneumatic Stapler
Hello again! Welcome back to another edition of Toolbarn’s Tool Spotlight. This weekly feature takes a look at a popular selling tool that consumers are taking advantage of and also what that tool has to offer. This week, we’re taking a look at Paslode’s 1/2″ Medium Crown Framing Pneumatic Stapler. Let’s go ahead and take a closer look at what makes the tool so desirable.
Photo Courtesy of Paslode
What It Offers
Paslode’s S200-S16 framing stapler was made with speed and efficiency in mind for framers, roofers and other construction professionals who use framing equipment. This stapler is lightweight and is quite versatile. It can be used to tackle a number of jobs whether that includes installing insulation, roof sheathing or even building a deck.
This stapler fires 1/2″ crown, 16 gauge staples, 3/4″ – 2″ in length. It also has a magazine capacity of 150. Paslode built this to withstand the toughest of jobs and it continues to perform very well.
The Stapler’s Advantages
While this stapler was built with performance in mind, it was also built for speed. Paslode’s stapler lets you go about your work with very little risk of jams. The upper piston valve was modified and improved to stop the valve from seizing. This allows the nailer to driver up to 12 fasteners a second…mixing speed and efficiency.
The stapler’s durability is also without question. Paslode made sure that this stapler can also stand up to the toughest of conditions. It comes with an extended bumper life which can go through more than 600,000 cycles without failing.
The stapler is very easy to use and the stapler features a two finger control aimed at eliminating fatigue while giving greater control to the operator. It is also air powered and also features a nail lock to prevent accidental discharges. If you’re looking for a heavy duty framing stapler for your jobsite, Paslode’s 1/2″ Medium Crown Framing Pneumatic Stapler is more than effective to get the job done.
Photo Courtesy of Paslode
There are several pros to this framing stapler. The drive depth is adjustable. The upper piston valve has been improved…limiting the chance of a jam. The stapler is also capable of everyday use…whether that is on the jobsite or at home. It’s also more durable thanks to its extended bumper life. The only real setback is that it has some trouble with smaller pancake compressors.
- Extend Bumper Life- tested to over 600,000 cycles without failure. More than three times the life of ordinary bumpers.
- Distinct Bumper Geometry- for consistent low pressure return during rapid fire. Drive up to 12 fasteners per second.
- Improved Upper Piston Valve- virtually eliminates valve seizure even under adverse environmental conditions such as dust, high heat and humidity.
- Top Load- For fast, easy loading, holds two strips
- Durable- For everyday use and long tool life
- Versatile- Drives 3/4″ to 2″ standard crown staples
- Lightweight- Decrease fatigue and increase productivity
- Quick Clear Nose- Clear jams quickly and easily
- Contemporary look
DISPLAY SKU – S200-S16
UPC / ISBN – 759501109810
PRODUCT WEIGHT (LBS.) – 4.9 pounds
MANUFACTURER’S WARRANTY – 1 Year
RETURN POLICY – Repair Only
Staple Crown: 1/2 inch
Staple Length: 3/4 to 2 inches
Wire Gauge: 16
Cycle Rate: 12 fasteners/sec.
Staple Capacity: 150
Air Req./100 p.s.i. (6.9 bar): 0.044/cycle
Op. Pres. p.s.i. (bar): 80-120 (5.5-8.3)
PACKAGE TYPE – Individual
POWER SOURCE – Pneumatic
Many roofers, framers and other construction professionals are taking advantage of this great deal. Paslode’s 1/2″ Medium Crown Framing Pneumatic Stapler costs $246.24 is available from Toolbarn right here!
Thanks for reading and make sure you keep an eye out for future content from all the web staff here from Toolbarn.